ELECTRONIC CONTROLLER EVCO EVK211N3

ELECTRONIC CONTROLLER EVCO EVK211N3

Rp330,000
Brand:EVCO
Product Code: EVK211N3
Stock Out Of Stock

Overview

EVK is a range of controllers for the management of refrigerated cabinets, tables and islands.They are available in compact version, in the standard s...
Specifications
BRAND EVCO

EVK is a range of controllers for the management of refrigerated cabinets, tables and islands.

They are available in compact version, in the standard size 74 x 32 mm; the user interface consists of a custom display (with decimal point and function icons), three or four keys and guarantees an IP65 protection rating, for easy cleaning.

Some controllers have a 30 res. A @ 250 VAC electromechanical relay for the direct control of high power compressors, avoiding the use of contactors.

Others have the real time clock (to store the HACCP alarms) and are able to protect the compressor (causing it to switch off) if the condenser temperature is outside an allowed range.

Installation is by panel, with snap-in brackets.


EVK211N3


Technical data


- Box: self-extinguishing grey.


- Frontal protection: IP 65.


- Connections (use copper conductors only): screw terminal blocks

(power supply, input and output), 6 poles connector (serial port; by

request, not available in EVK201), 4 poles connector (to the remote

indicator; by request, not available in EVK201); extractable terminal blocks

(power supply, input and output) by request, not available in EVK201.


- Working temperature: from 0 to 55 °C (32 to 131 °F, 10 ... 90% of

relative humidity without condensate).


Power supply EVK211: 230 VAC, 50/60 Hz, 3 VA (approximate);

115 VAC or 12-24 VAC/DC or 12 VAC/DC by request.


- Insulation class: 2.

Alarm buzzer: by request, not available in EVK201.


- Measure inputs: 1 (cabinet probe) for PTC/NTC probes.

-

 Working range: from -50.0 to 150.0 °C (-50 to 300 °F) for PTC probe,

from -40.0 to 105.0 °C (-40 to 220 °F) for NTC probe.


- Resolution: 0.1 °C/1 °C/1 °F.


- Digital outputs: 1 relay:

• compressor relay: 16 res. A @ 250 VAC (changeover contact); 5 FLA, 30 LRA.

 The maximum current allowed on the load is 10 A.


- Serial port: port for the communication with the supervision system

(through a serial interface, via TTL, with MODBUS communication protocol) or with the programming key; by request, not available in EVK201.


- Further communication ports: port for the communication with

the remote indicator; by request, not available in EVK201.